Qualitora LLC, US sourcing partner NM Business ID 7688237 First personal reply within 2 business days

24'6"x27 ft lumber tarp with 8 ft drop

This 27 ft long reference combines 24 ft 6 in of flat width with a published 8 ft drop. Check the top width and the flap convention before treating the label as usable coverage.

Published market reference. Retail price records below were read on 2026-08-20; construction details were checked on October 27, 2026. We hold no stock. These are reference listings, not our products or quotes.
Published flat size
24 ft 6 in × 27 ft
Published side drop
8 ft
Fabric weight per area
18 oz/yd² body / 14 oz/yd² drop flap

N2 published reference: Tarps Now LTM24278, checked 2026-10-27, LTM24278. Confirm the current variant and finished dimensions.

Will the width leave enough fabric on both sides?

Conceptual illustration. You can pause the movement.

Static view: reduced motion is enabled.
24 ft 6 in width divided into 8 ft 6 in top and two 8 ft drops Conceptual front view. Width minus two equal vertical drops leaves 8 ft 6 in across the top. This assumes finished dimensions and a rectangular load. It does not establish fit. Front view · width budget 24.5 − 2 × 8 = 8.5 ft 8 ft 6 in top Rectangular load section 8 ft on each side Symmetric, vertical sides assumed

8 ft 6 in across the top, under these assumptions

24 ft 6 in of flat width = 8 ft 6 in on top + 8 ft on each side. This is a geometric check using the published width and drop, not a verified load envelope.

Measure the actual top width, load height and desired lower edge. Wider shoulders, rounded corners or unequal side coverage change the fabric path.

Ask whether the listing gives cut size or finished size. Agree hem, seam and size tolerances before using these numbers to approve fit.

Check width and drop together.

Dimensions in feet. The section uses one scale for the top and both sides. Fabric thickness and corner shape are schematic. No extra allowance has been assumed.

Use as a starting point when: your measured top and side coverage are consistent with 24 ft 6 in of fabric width. The model above leaves 8 ft 6 in on top with two vertical 8 ft sides.

Choose another size or pattern when: the fabric path exceeds that width, or the end treatment and piece arrangement do not cover your measured load.

Common buying error: treating “8 ft drop” as a guarantee for any load 8 ft high. Top width, finished size and corner shape also matter.

What does the 27 ft length include?

Conceptual illustration. You can pause the movement.

Static view: reduced motion is enabled.
24 ft 6 in by 27 ft published size and measurement references A dimensioned reference rectangle, not a cutting pattern. Width is measured from side to side, length from end to end. Edge A is an example datum for the finished drawing. Locate the end flap and rain flaps on a separate confirmed pattern. Plan view · measurement frame 24 ft 6 in wide 27 ft long Published size reference only Edge A · agree this datum Flap width and position: confirm Panel map required before cutting

Keep the overall length and flaps separate

The listing does not establish a rain-flap allowance within the 27 ft length. Confirm what the overall dimension includes; do not apply another vendor's convention.

Request a labeled flat pattern showing the main body, end flap, corner rain flaps, joins and every finished dimension. The rectangle here identifies the published width and length; it does not invent those panel boundaries.

For a set, record the number of pieces, their orientation and usable overlap separately. Overall length alone does not establish covered load length.

See the flap and length checklist.

The rectangle preserves the published width-to-length ratio. It is a measurement frame, not the product outline or a production pattern. Source: Tarps Now LTM24278, checked 2026-10-27.

Details published for this reference

Construction details checked October 27, 2026 for LTM24278
ItemPublished detailConfirm before ordering
Finished piece weightApproximately 95 lbWeight of the complete piece, with panels and hardware. Separate from oz/yd².
D-ring rows3Which sides and ends, offsets from named finished edges, reinforcement and joins.
Total D-rings / grommetsTotal counts not established hereCount and location on the same labeled drawing; a total does not establish tested resistance.
Flap convention8 ft “drop flap”; panel boundaries to confirm; rain-flap allowance not established hereFlap width, length, orientation and the overall dimension endpoints.

The listing gives 24 in spacing for perimeter grommets and D-rings. Confirm counts and the exact panel boundaries on the proposed drawing.

Source: Tarps Now LTM24278, checked 2026-10-27. These listing details are not an agreed specification for a new factory order.

Nearby formats: which dimension changes?

Other published Lumber references, not interchangeable fits
FormatDropChanges from this reference
24x28 ft8 ft24 ft width; 28 ft length. Confirm the pattern separately.
28x28 ft10 ft28 ft width; 28 ft length; 10 ft drop. Confirm the pattern separately.
20x27 ft6 ft20 ft width; 6 ft drop. Confirm the pattern separately.

View all published Lumber formats.

Dated US retail price reference

Historical record read 2026-08-20; live prices and variants may differ
VendorPublished priceSource and date
Tarps Now319.95 USDCurrent reference listing
Tarps Now listing, read 2026-08-20

The link opens the current listing, not a price archive. Budgeting references are not our quotes; a sourcing quote depends on the agreed construction, quantity, freight and duty.

Put these points on the written specification

  1. Reference 24'6"x27 ft with 8 ft drop as a starting point. State the measured load envelope, finished width and length, tolerances, end and rain flaps, piece count and usable set overlap.
  2. Name the 18 oz body and 14 oz drop flap on a confirmed panel map. Agree each material and coated weight separately. Complete-piece weight is a separate handling reference.
  3. Dimension D-ring rows and grommets from named edges. Specify material, attachment patches, seams and reinforcement; agree tests and acceptance separately from the visual count.
  4. Keep buyer requirements, supplier confirmation and received-batch evidence separate. Agree samples, test methods, direction, sampling and acceptance criteria before production.

One published 18 oz fabric reference

Typical values for Trivantage C18403 Super 18 vinyl-coated polyester, sheet issued September 6, 2010. A dated material reference, not a specification for all 18 oz fabrics or a test of the proposed batch.

Fabric weight18 oz per square yard
Grab tensile450 x 425 lbs (ASTM D751)
Tongue tear (ASTM D751)90 x 80 lbs, 8 x 10 specimen at 12 in/min
RF-weld adhesion (ASTM D751)10 lbs/in
Puncture resistance (ASTM D4833)185 lbs
Low temperature (ASTM D2136)-40 F

N2 source: Trivantage C18403 Super 18 technical sheet, issued 2010-09-06, checked 2026-10-27 (PDF). These are material reference values, not test results for the retailer's tarp or a proposed batch.

Check the received piece against its agreed drawing

  • Dimensions: measure finished width, length, drop and each flap against the agreed endpoints and tolerances.
  • Fabric weight: use a measured-area coated-fabric specimen and the agreed method. Check the body and the named lighter panel separately.
  • Hardware: count and locate rings and grommets, then inspect patches and attachment construction. Appearance and counts do not verify resistance.
  • Joins and testing: inspect seams and hems; use the agreed sample and acceptance plan for destructive tests. Record the batch and any deviations.

Use the family reception checklist.

Factory minimums depend on the configuration. Smaller planned purchases can be reviewed; consult the supply calendar before a first order.

First personal reply within 2 business days, with clarifying questions or next steps.