Qualitora LLC, US sourcing partner NM Business ID 7688237 First personal reply within 2 business days

Plan your next tarp purchase

One purchase, several configurations. Keep one line per format or pattern. Keep it for your team, compare written proposals, or ask us to review the need.

No email required. Your draft is saved in this tab. Export a copy before closing it. Leave unknown details open; a published reference is not an agreed specification.

Plan the lot

Define each configuration

Configuration 1

If you count sets, say how many pieces are in each set.

Planning references, not an agreed pattern or a supplier test report.

Up to six configurations in one draft. Count pieces, or state the pieces in each set. This is not a minimum order.

Your purchase planning brief

Draft buyer requirements. Open points need written confirmation before ordering.

 
Ask us to review this need →

Conceptual illustration. You can pause the movement.

Static view: reduced motion is enabled.

Count pieces on each line before counting sets

Two configurations do not become one undefined set Configuration A12 pieces · drawing A Configuration B8 pieces · drawing B 12 + 8 = 20 pieces

One configuration = one defined pattern and construction. Give it an ID, a drawing revision and its own quantity. Different geometry or material may need another line.

If you buy sets, define what is in one set. State the number of pieces and their configuration IDs. A total piece count alone does not define that set.

Keep the same IDs in the supplier's reply and the reception record. Unknown measurements stay open until confirmed.

Illustrative quantities, not your draft, our minimum order or an approved product. The form keeps the quantities you enter on their own configuration lines; it does not guess set contents.

Plan reception for the configurations in this draft

Each configuration keeps its own requirements. In a mixed lot, use the relevant checks for each line.

Transport tarp configurations

What makes a configuration checkable at reception?

Keep your requirement, the supplier's written confirmation and the received batch record separate. Use the same configuration ID and drawing revision throughout.

RequirementWritten confirmationReception record
Top, sides and flapPanel map and proposed fabric for each panelCompare construction with the approved drawing
Finished coated weight per areaUnits, agreed tolerance and representative fabric sampleMeasure the fabric; whole-piece weight is only a screening check
D-rings, grommets, hems and seamsCounts, spacing, reinforcement and seam method for this configurationCount and photograph the agreed layout; any pull test needs an agreed method and acceptance criterion
Finished geometryNamed edges, dimensions, tolerance and drawing revision; coil pattern and openings where applicableMeasure against the agreed drawing
Test propertiesMethod, specimen, conditions and result for the proposed materialA published fabric sheet is not a test report for the received batch

A welded seam description alone does not confirm water performance. Agree the method, acceptance criterion, sampling and evidence before ordering. No default tolerance or acceptance threshold is assumed.

  1. 1. Your requirement

    Name the configuration, drawing revision, coated fabric weight and proposed tolerance. Mark open properties as unresolved.

  2. 2. Supplier confirmation

    Get the same revision and explicit acceptance of each property. A catalog sheet or “usually” in a reply is not a confirmed order term.

  3. 3. Received batch record

    Identify the batch, piece and agreed specimen. Enter actual observations beside the confirmed values, then record discrepancies.

A proposed purchasing workflow. No supplier approval or batch test is represented as completed.