Qualitora LLC, US sourcing partner NM Business ID 7688237 First personal reply within 2 business days

6×6×6 ft coil tarp: cover dimensions and fit checks

Two retailers publish this nominal size, with different complete-piece weights and edge details. Start with the cover drawing, then check your actual coil dimensions and the outside envelope to be covered.

Published market reference. We hold no stock. Retail prices below were read 2026-08-20; construction details and linked drawings were checked 2026-10-27. These listings are references, not our products or quotes.
Published cover reference
6 × 6 × 6 ft
USCC sides and top
18 oz/yd²
Fit to your coil
Confirm on a finished drawing

What does the 6 × 6 × 6 ft drawing describe?

Conceptual illustration. You can pause the movement.

Static view: reduced motion is enabled.
6 × 6 × 6 ft cover drawing reference 6 ft width 6 ft height 6 ft length

Three dimensions on the cover drawing

The US Cargo Control drawing labels 6 ft across the cover, 6 ft in overall height and 6 ft along its length. Its curved top and lower panels make this a shaped cover reference.

Keep the coil measurements separate. The label does not establish the maximum coil diameter, the available internal clearance or the finished fit around packaging and protection.

Ask for finished dimensions, tolerances, seam construction and the corner/opening layout on the drawing for the ordered cover.

Simplified illustration, not to scale or a production pattern. N2 source: US Cargo Control HCT666 drawing, checked 2026-10-27, linked from HCT666-BLK. Hardware marks and corner details are omitted; the source drawing and the agreed finished pattern govern those details. Highlights identify dimensions, without adding a fit allowance.

Use as a starting reference when: the vendor can confirm its finished shape and dimensions against your measured coil and covered assembly.

Choose another size or pattern when: the covered envelope, corner treatment or openings differ from the proposed finished drawing.

Common buying error: treating a 6 ft dimension on a cover drawing as proof that every coil of that diameter will fit. Packaging, protection and the cover construction also need to be included.

Measure the coil, then describe the covered assembly

Conceptual illustration. You can pause the movement.

Static view: reduced motion is enabled.

Starting reference: 6 x 6 x 6 ft. Measure the actual coil and covered assembly below. The published cover size does not fill in D, W or the eye orientation.

Looking into the eye

Outside diameter is not eye diameter D Eye D = outside diameter

Looking across the axis

Coil width is measured along the eye axis Eye axis W = axial width
Label the eye axis relative to the trailer Front Side Up

Label the eye orientation

State whether the eye faces a trailer side, the front/rear, or upward. Mark the trailer direction on your own sketch; the two measurement views above do not select a loading orientation.

Include the covered envelope and openings

Mark packaging and protection on the outside outline of your assembly. Locate each required opening from a named edge, with dimensions and units. Agree the finished cover pattern and any allowances with the supplier; D and W alone do not define it.

Conceptual measurement key, not to scale and not a loading or securement instruction. Add the covered envelope, packaging and openings to the dimension sheet. A 6 × 6 × 6 or 7 × 7 × 7 listing is not a measured coil or proof of fit.

Use the coil measurement checklist for diameter, axial width, eye orientation, the covered envelope and opening locations.

First personal reply within 2 business days, with clarifying questions or next steps.

What is published for these offers?

Vendor-stated details checked 2026-10-27; confirm the current variant
CompareUS Cargo ControlTarps Now
Listing / SKUHCT666-BLK
N2 · US Cargo Control HCT666-BLK, construction checked 2026-10-27
CTH666-BLK
N2 · Tarps Now CTH666-BLK, construction checked 2026-10-27
Complete-piece weight33 lb. This includes the piece construction; it does not establish fabric weight per area.25 lb. This includes the piece construction; it does not establish fabric weight per area.
Fabric per area / thicknessSides and top: 18 oz/yd². PVC-coated polyester; the listing specifies the same fabric weight for sides and top.Top: 18 oz/yd²; 18 mil thickness stated. PVC-coated polyester. Fabric weight is stated for the top; confirm the side-panel weight separately.
Seams and reinforcementHeat-sealed seams; the D-ring rows are then sewn on. The listing describes abrasion-resistant pads beneath the D-rings.The description states heat-welded seams, double-lock-stitched hems and nylon webbing reinforcement.
Fixings2 D-ring rows. Grommets around the hems and D-ring rows around the four sides. Total counts and exact corner/opening treatment are not established here.2 D-ring rows. Spur grommets around the perimeter and D-ring rows. Confirm total counts and the finished position drawing.
Spacing and position checkThe linked drawing labels 1 ft spacing. Confirm counts, offsets and positions against the drawing for the ordered cover.The listing states 24 in spacing for grommets and D-rings. This is this vendor's offer, not a rule for the US Cargo Control cover.

Compare the same finished pattern, panels and included features before comparing price or total weight. A row count or spacing does not establish tested edge resistance. The reviewed listings do not establish a common test result or a universal service life for these covers.

Confirm finished dimensions and tolerances, the cut/finished size basis, and the size and location of any corner slits or openings. The simplified drawing above does not specify those details.

Historical US retail price references

Recorded 2026-08-20; the links open current listings, not price archives
VendorRecorded priceReference
US Cargo Control179.99 USDHCT666-BLK
Read 2026-08-20
Tarps Now200.95 USDCTH666-BLK
Read 2026-08-20

These are budgeting references, not our quotes or current availability. A sourcing quote depends on confirmed construction, quantity, freight and duty.

Compare the 7 x 7 x 7 ft reference: its USCC drawing changes each published dimension by 1 ft upward. That is a difference between cover references, not a clearance allowance or a guarantee of fit.

Put the fit question and the construction in writing

  1. Keep 6 x 6 x 6 ft as a published starting reference. Enter your measured outside diameter D and axial width W with units; label the eye direction relative to the trailer.
  2. Show the covered envelope including packaging and protection. Locate openings from named edges. Ask for the finished cover drawing, dimensions, tolerances and any allowances before approving a pattern.
  3. Name the fabric on the top, sides and any other panel. Keep oz/yd², mil thickness and complete-piece weight separate, with the agreed measurement methods and samples.
  4. Specify seams, hems, reinforcement and hardware positions on that same drawing. Confirm counts, row offsets and any slits without inferring them from a nominal spacing.
  5. Agree inspection and any sample tests, with the specimen, method, direction, sampling and acceptance criteria stated. Record the approved sample and the received batch.

First personal reply within 2 business days, with clarifying questions or next steps.

One published 18 oz fabric reference

Typical values for Trivantage C18403 Super 18 vinyl-coated polyester, sheet issued September 6, 2010. A dated material reference, not a specification for all 18 oz fabrics or a test of the proposed batch.

Fabric weight18 oz per square yard
Grab tensile450 x 425 lbs (ASTM D751)
Tongue tear (ASTM D751)90 x 80 lbs, 8 x 10 specimen at 12 in/min
RF-weld adhesion (ASTM D751)10 lbs/in
Puncture resistance (ASTM D4833)185 lbs
Low temperature (ASTM D2136)-40 F

N2 source: Trivantage C18403 Super 18 technical sheet, issued 2010-09-06, checked 2026-10-27 (PDF). These values do not verify the retailer's cover or a proposed batch. Agree required performance separately.

Check the received cover against the approved pattern

Proposed coil-cover checks against an approved pattern and written order. Visual and dimensional checks are separate from agreed sample tests.

  • Finished pattern against the approved dimension sheet. Check the named dimensions and tolerances, opening locations and correspondence to the specified eye orientation. A published cube label does not establish fit.
  • Material and coated weight per area on the agreed specimen. Keep sample identification, area and method with the result. A finished cover's total weight includes seams, reinforcement and hardware.
  • Hardware count and positions against the coil drawing. Record each location from a named edge. Steel and lumber tarp hardware counts are not coil-cover requirements.
  • Seams, hems and reinforcement against the approved sample. Compare the construction shown on the order. Agree any opening of a seam or destructive hardware test on a designated specimen with a method, direction and acceptance threshold.

Confirm the coil pattern, seam construction and reinforced hardware together. Inspection of the cover does not design or verify cargo securement.

Factory minimums depend on the configuration. Smaller planned purchases can be reviewed; check the supply calendar before planning a first order.