7×7×7 ft coil tarp: cover dimensions and fit checks
This larger nominal reference keeps the shaped-cover approach. Compare its published drawing with the smaller reference, then confirm the diameter, axial width and covered envelope of your own coils.
- Published cover reference
- 7 × 7 × 7 ft
- USCC sides and top
- 18 oz/yd²
- Fit to your coil
- Confirm on a finished drawing
What does the 7 × 7 × 7 ft drawing describe?
Conceptual illustration. You can pause the movement.
Static view: reduced motion is enabled.Three dimensions on the cover drawing
The US Cargo Control drawing labels 7 ft across the cover, 7 ft in overall height and 7 ft along its length. Its curved top and lower panels make this a shaped cover reference.
Keep the coil measurements separate. The label does not establish the maximum coil diameter, the available internal clearance or the finished fit around packaging and protection.
Ask for finished dimensions, tolerances, seam construction and the corner/opening layout on the drawing for the ordered cover.
Use as a starting reference when: the vendor can confirm its finished shape and dimensions against your measured coil and covered assembly.
Choose another size or pattern when: the covered envelope, corner treatment or openings differ from the proposed finished drawing.
Common buying error: treating a 7 ft dimension on a cover drawing as proof that every coil of that diameter will fit. Packaging, protection and the cover construction also need to be included.
Measure the coil, then describe the covered assembly
Conceptual illustration. You can pause the movement.
Static view: reduced motion is enabled.Starting reference: 7 x 7 x 7 ft. Measure the actual coil and covered assembly below. The published cover size does not fill in D, W or the eye orientation.
Looking into the eye
Looking across the axis
Label the eye orientation
State whether the eye faces a trailer side, the front/rear, or upward. Mark the trailer direction on your own sketch; the two measurement views above do not select a loading orientation.
Include the covered envelope and openings
Mark packaging and protection on the outside outline of your assembly. Locate each required opening from a named edge, with dimensions and units. Agree the finished cover pattern and any allowances with the supplier; D and W alone do not define it.
Use the coil measurement checklist for diameter, axial width, eye orientation, the covered envelope and opening locations.
First personal reply within 2 business days, with clarifying questions or next steps.
What is published for this offer?
| Compare | US Cargo Control |
|---|---|
| Listing / SKU | HCT777-BLK N2 · US Cargo Control HCT777-BLK, construction checked 2026-10-27 |
| Complete-piece weight | 36 lb. This includes the piece construction; it does not establish fabric weight per area. |
| Fabric per area / thickness | Sides and top: 18 oz/yd². PVC-coated polyester; the listing specifies the same fabric weight for sides and top. |
| Seams and reinforcement | Heat-sealed seams; the D-ring rows are then sewn on. The listing describes abrasion-resistant pads beneath the D-rings. |
| Fixings | 2 D-ring rows. Grommets around the hems and D-ring rows around the four sides. Total counts and exact corner/opening treatment are not established here. |
| Spacing and position check | The linked drawing labels 1 ft spacing. Confirm counts, offsets and positions against the drawing for the ordered cover. |
Compare the same finished pattern, panels and included features before comparing price or total weight. A row count or spacing does not establish tested edge resistance. The reviewed listings do not establish a common test result or a universal service life for these covers.
Confirm finished dimensions and tolerances, the cut/finished size basis, and the size and location of any corner slits or openings. The simplified drawing above does not specify those details.
Historical US retail price references
| Vendor | Recorded price | Reference |
|---|---|---|
| US Cargo Control | 292.00 USD | HCT777-BLK Read 2026-08-20 |
These are budgeting references, not our quotes or current availability. A sourcing quote depends on confirmed construction, quantity, freight and duty.
Compare the 6 x 6 x 6 ft reference: its USCC drawing changes each published dimension by 1 ft downward. That is a difference between cover references, not a clearance allowance or a guarantee of fit.
Put the fit question and the construction in writing
- Keep 7 x 7 x 7 ft as a published starting reference. Enter your measured outside diameter D and axial width W with units; label the eye direction relative to the trailer.
- Show the covered envelope including packaging and protection. Locate openings from named edges. Ask for the finished cover drawing, dimensions, tolerances and any allowances before approving a pattern.
- Name the fabric on the top, sides and any other panel. Keep oz/yd², mil thickness and complete-piece weight separate, with the agreed measurement methods and samples.
- Specify seams, hems, reinforcement and hardware positions on that same drawing. Confirm counts, row offsets and any slits without inferring them from a nominal spacing.
- Agree inspection and any sample tests, with the specimen, method, direction, sampling and acceptance criteria stated. Record the approved sample and the received batch.
First personal reply within 2 business days, with clarifying questions or next steps.
One published 18 oz fabric reference
Typical values for Trivantage C18403 Super 18 vinyl-coated polyester, sheet issued September 6, 2010. A dated material reference, not a specification for all 18 oz fabrics or a test of the proposed batch.
| Fabric weight | 18 oz per square yard |
| Grab tensile | 450 x 425 lbs (ASTM D751) |
| Tongue tear (ASTM D751) | 90 x 80 lbs, 8 x 10 specimen at 12 in/min |
| RF-weld adhesion (ASTM D751) | 10 lbs/in |
| Puncture resistance (ASTM D4833) | 185 lbs |
| Low temperature (ASTM D2136) | -40 F |
N2 source: Trivantage C18403 Super 18 technical sheet, issued 2010-09-06, checked 2026-10-27 (PDF). These values do not verify the retailer's cover or a proposed batch. Agree required performance separately.
Check the received cover against the approved pattern
Proposed coil-cover checks against an approved pattern and written order. Visual and dimensional checks are separate from agreed sample tests.
- Finished pattern against the approved dimension sheet. Check the named dimensions and tolerances, opening locations and correspondence to the specified eye orientation. A published cube label does not establish fit.
- Material and coated weight per area on the agreed specimen. Keep sample identification, area and method with the result. A finished cover's total weight includes seams, reinforcement and hardware.
- Hardware count and positions against the coil drawing. Record each location from a named edge. Steel and lumber tarp hardware counts are not coil-cover requirements.
- Seams, hems and reinforcement against the approved sample. Compare the construction shown on the order. Agree any opening of a seam or destructive hardware test on a designated specimen with a method, direction and acceptance threshold.
Confirm the coil pattern, seam construction and reinforced hardware together. Inspection of the cover does not design or verify cargo securement.
Factory minimums depend on the configuration. Smaller planned purchases can be reviewed; check the supply calendar before planning a first order.