24x18 ft steel tarp with 8 ft drop
This 24 ft × 18 ft reference has a published 8 ft drop. Check the fabric path over the load, then specify the edge and hardware layout for this exact format.
- Published flat size
- 24 ft × 18 ft
- Published side drop
- 8 ft
- Fabric weight per area
- 18 oz/yd²
N2 published reference: US Cargo Control black variant, checked 2026-10-27, HST24188-BLK. Confirm the current variant and finished dimensions.
Will the width leave enough fabric on both sides?
Conceptual illustration. You can pause the movement.
Static view: reduced motion is enabled.8 ft across the top, under these assumptions
24 ft of flat width = 8 ft on top + 8 ft on each side. This is a geometric check using the published width and drop, not a verified load envelope.
Measure the actual top width, load height and desired lower edge. Wider shoulders, rounded corners or unequal side coverage change the fabric path.
Ask whether the listing gives cut size or finished size. Agree hem, seam and size tolerances before using these numbers to approve fit.
Use as a starting point when: your measured top and side coverage are consistent with 24 ft of fabric width. The model above leaves 8 ft on top with two vertical 8 ft sides.
Choose another size or pattern when: the fabric path exceeds that width, or the end treatment and piece arrangement do not cover your measured load.
Common buying error: treating “8 ft drop” as a guarantee for any load 8 ft high. Top width, finished size and corner shape also matter.
What does the 18 ft length include?
Conceptual illustration. You can pause the movement.
Static view: reduced motion is enabled.Give every row a measurement origin
For this 24 ft × 18 ft format, the listing gives 3 on sides, 2 on ends D-ring rows. Confirm whether row counts refer to sides, ends or both.
Name a finished edge, then dimension each row offset, each ring position and the first and last perimeter grommet. Agree corner construction and reinforcement separately.
A total count does not define positions, attachment construction or tested resistance. This frame deliberately leaves the layout open for the confirmed drawing.
Details published for this reference
| Item | Published detail | Confirm before ordering |
|---|---|---|
| Finished piece weight | 69 lb | Weight of the complete piece, with panels and hardware. Separate from oz/yd². |
| D-ring rows | 3 on sides, 2 on ends | Which sides and ends, offsets from named finished edges, reinforcement and joins. |
| Total D-rings / grommets | 68 / 42 | Count and location on the same labeled drawing; a total does not establish tested resistance. |
Source: US Cargo Control black variant, checked 2026-10-27. These listing details are not an agreed specification for a new factory order.
Specify edge protection and abrasion reinforcement for your load separately. Waterproof fabric does not by itself establish a watertight finished tarp; seams and attachment construction need their own agreement. Review the Steel fabric and construction checks.
Nearby formats: which dimension changes?
| Format | Drop | Changes from this reference |
|---|---|---|
| 20x18 ft | 6 ft | 20 ft width; 6 ft drop. Confirm the pattern separately. |
| 16x27 ft | 4 ft | 16 ft width; 27 ft length; 4 ft drop. Confirm the pattern separately. |
Dated US retail price reference
| Vendor | Published price | Source and date |
|---|---|---|
| US Cargo Control | 324.99 USD | Current reference listing US Cargo Control listing, read 2026-08-20 |
The link opens the current listing, not a price archive. Budgeting references are not our quotes; a sourcing quote depends on the agreed construction, quantity, freight and duty.
The historical corpus also records a 14 oz variant. Its exact variant and panel construction were not matched in this review, so it is excluded from a like-for-like price comparison. Confirm those details before comparing a lighter offer.
Put these points on the written specification
- Reference 24x18 ft with 8 ft drop as a starting point. State the measured load envelope, finished width and length, tolerances, end treatment, piece count and usable set overlap.
- Name the coated fabric, 18 oz/yd² weight requirement and agreed tolerance. Complete-piece weight is a separate handling reference.
- Dimension D-ring rows and grommets from named edges. Specify material, attachment patches, seams and reinforcement; agree tests and acceptance separately from the visual count.
- Keep buyer requirements, supplier confirmation and received-batch evidence separate. Agree samples, test methods, direction, sampling and acceptance criteria before production.
One published 18 oz fabric reference
Typical values for Trivantage C18403 Super 18 vinyl-coated polyester, sheet issued September 6, 2010. A dated material reference, not a specification for all 18 oz fabrics or a test of the proposed batch.
| Fabric weight | 18 oz per square yard |
| Grab tensile | 450 x 425 lbs (ASTM D751) |
| Tongue tear (ASTM D751) | 90 x 80 lbs, 8 x 10 specimen at 12 in/min |
| RF-weld adhesion (ASTM D751) | 10 lbs/in |
| Puncture resistance (ASTM D4833) | 185 lbs |
| Low temperature (ASTM D2136) | -40 F |
N2 source: Trivantage C18403 Super 18 technical sheet, issued 2010-09-06, checked 2026-10-27 (PDF). These are material reference values, not test results for the retailer's tarp or a proposed batch.
Check the received piece against its agreed drawing
- Dimensions: measure finished width, length, drop and end treatment against the agreed endpoints and tolerances.
- Fabric weight: use a measured-area coated-fabric specimen and the agreed method. The complete piece on a scale cannot isolate fabric weight per area.
- Hardware: count and locate rings and grommets, then inspect patches and attachment construction. Appearance and counts do not verify resistance.
- Joins and testing: inspect seams and hems; use the agreed sample and acceptance plan for destructive tests. Record the batch and any deviations.
Use the family reception checklist.
Factory minimums depend on the configuration. Smaller planned purchases can be reviewed; consult the supply calendar before a first order.
First personal reply within 2 business days, with clarifying questions or next steps.